Top 10 King Size Bed Frame UK – Furniture Legs

As an Amazon Associate I earn from qualifying purchases.



Bed Adjustable Legs, Metal Furniture Support Legs Foot Retractable Heavy Duty Bed Center Frame Slat Support Leg,Suitable for Cabinet Sofa Bed Frame Replacement Parts 2 Pcs(7inch -13inch Black

KRIZJUES #ad - Simple and convenient, you only need to connect the gasket and Bed Adjustable Legs to install successfully. This will pose a health threat to the cervical spine. Can strengthen the stability of the bed.

Combine the two. Make the bed more reliable without making noise. Brand: krizJUES. The bottom is made of non-slip and scratch-resistant nylon. Easy to install: the adjustable center support leg is free of punching procedures. The bed will be stable and will not shake. You can adjust your comfortable height. Bed frame slat support leg can be completely installed in the curved position at the bottom of the bed.

Material: furniture adjustable legs surface adopts high-strength high-quality stainless steel. Thereby improving the quality of sleep. Installed under the bed. Thereby improving high-quality sleep. And there will be no signs of scratching on the ground. Will give you health protection. Prevent breakage: center support leg for bed sturdy and durable.
ManufacturerMyukbest #ad
Height3.8 cm (1.5 Inches)
Length18 cm (7.09 Inches)
Weight0.95 kg (2.09 Pounds)
Width11 cm (4.33 Inches)
Part Number8-8

2. Knpwer


SHEENO 4 PCS Metal Furniture Legs,Sofa Legs,Modern Metal Triangle Furniture Feet DIY Replacement for Cabinet Cupboard Sofa Couch Chair(Silver) 4 inch 10cm

Knpwer #ad - Package content4 inch/ 10cm 4 table legs, 16 screws. The bearing capacity of the 4 furniture legs is about 800KG, and the triangular design increases the stability of the area supporting the furniture without shaking.

Widely applicationaccessories for DIY furniture, ottoman, bed, cabinets, couch, shelves, chair, sofa, table ect. Easy to installintegrated design, heavy-duty feet are equipped with all screws, floor protection and 6 pre-drilled holes for each foot on the mounting plate, just remove the old feet and tighten the new feet with a drill bit.

Premium material4 metal furniture feet are made of high-quality iron, easy to clean, the surface is frosted, smooth, rust-proof, durable, strong load-bearing capacity and scratch-resistant. Load capacity4 support legs over 800kg vertical weight load, and the triangular design increases the stability of the area supporting the furniture without shaking.
BrandKnpwer #ad
ManufacturerSHEENO #ad
Width1 cm (0.39 Inches)
Part Number1



SUMNACON 4Pcs 7.5cm Metal Sofa Legs Wardrobe Leg Furniture Leg, Modern Solid Sofa Feet Cabinet Feet Table Legs for Replacement Silver

SUMNACON #ad - Apply to: unique double arc structure, tv cabinet, dresser, suitable for light luxury furniture replacement such as sofa, elegant and practical, chair, cabinet, wardrobe, table, bed, coffee table and other furniture accessories.

Packing: package includes 4 packs modern sofa feet and 16 pieces screws. It is convenient for you to change the height of sofa through replacing sofa leg of different height. Size of sofa leg is 11. 5 x 7. 5cm length x Height. High quality: made of heavy duty metal material, the surface is smooth without bumps through pressing, no rust, which has strong load-bearing capacity, no fading, electroplating and polishing, anti-scratch.

Novel design: this furniture leg is novel double arc design which makes load capacity more stable, there are non-slip pads on the bottom of sofa leg, when moving the furniture there is no floor damaging and no harsh noise. Installation: easy to use, at first remove the old furniture feet, and then tighten the new furniture feet with screws to work normally.
ManufacturerSUMNACON #ad
Part Number‎YG0003



Black Table Legs, Heavy Duty Support Pole, Reinforcement Kit for Cabinet Sofa Bed Frame Replacement Parts, 2 PCS Bed Frame Support Leg, Metal Adjustable Furniture Leg, 7-13” Adjustable Bed Legs

JUMPENGATP #ad - The bed adjustable support is therefore suitable for any room and makes every piece of furniture a real eye-catching focal point. Applications: adjustable furniture leg are perfect for completing and enhancing your furniture and giving them a new look. Uneven ground? no problem! colour: matt black | height: 180mm-330mm | Diameter: Φ38 mm | Shape: round, high load-bearing capacity, bed frame support adjustable.

The adjustable support pole with their modern and simple appearance. Jumpengatp adjustable bed legs are made of high quality stainless steel and plastic for a rust-proof, modern and elegant design. Thanks to the bed frame support leg from 180mm to 330mm, the legs are stable and wobble-free on any floor. If the bed frame has holes, align the double holes directly to the brackets, cross the legs with the bed frame, place a secondary plate on the bed frame to clamp it in place and place 1 or 2 screws on each side depending on the size of the bed frame, install the screws to adjust the distance and tighten.

Examples include sideboards, cabinets, worktops, bedside tables, chests of drawers, work plans, DIY furniture, wardrobes, TV panels, desks, tables, shelves or office furniture. If the bed frame does not have holes, adjust the distance and tighten. Box contents: set of 2 bed legs support for 38 x 38 x 180 mm - 330 mm black, including mounting plate and set of screws and nuts.
Manufacturerjumpengatp #ad
Part Number18-33-B2



Save on Goods UK,Mushroom shape Castors Gliders, Glides. Bed Feet. Furniture & Bed foot fittings fixings. Silver chrome finish. Set of 4

BED AND MATTRESS #ad - Direct replacement for castor wheels. This listing is for 4 of these feet including the metal sleeves. 4 gliders including metal sleeves. The dimensions are available in one of the pictures. A set of saveongoodsUK gliders.
ManufacturerHELI-BEDS #ad
Height7 cm (2.76 Inches)
Length6.5 cm (2.56 Inches)
Width6.5 cm (2.56 Inches)
Part Number5055757421078

6. Novamer


4Pcs Adjustable Metal Bed Frame Support Legs, Sofa, for King Bed, Furniture Cabinet Replacement Parts 7.1"-13", Extra Durable Steel Feet, Table, Frame Center Slats Heavy Support Leg

Novamer #ad - The furniture legs are suitable for most bed frames, bed center slat、Sofa Furniture Cabine and other furniture. Thicker material, strong bearing capacity. The length of the bed frame legs top mounting plate is 4. 3 inches. If you find that the product is damaged or missing parts, 10 × screws, 5 × mounting plates, please contact us in time, 10 × nuts, the bed legs replacement for old bed frames or new bed frames are both good options.

The bed frame support legs allows you to add essential support to bed slats or bed frame, protecting your bed and mattress from sagging and damage. High-quality material: the bed frame center support legs are made of high-quality steel and elegant black matte paint to prevent rust and corrosion. Easy to install: bed frame feet are simple in structure and easy to install. Lf the bed frame has holes, align the double holes with the bracket and tighten the screw.

If the bed frame has no holes,, clamp the bed frame with bed frame legs and auxiliary plate and tighten the screws. Adjustable height bed legs: the height of the bed support legs is adjustable, just turn it slightly to adjust the height adjustment range: 7. 1"-13", so you can adjust it to different heights as needed. Note: for structural stability, we do not recommend that you adjust the bed frame legs to their maximum height for use. Package content: 4 x bed frame support legs, we will solve it for you in time.
BrandNovamer #ad
ManufacturerNovamer #ad
Part NumberJBG-30

7. Wlrrcwdttc


Wlrrcwdttc 4 Pcs Adjustable Height Bed Support Legs for Bed Frame/Bed Center Slat, Metal Adjustable Furniture Legs 7.08-12.2 inch for Bed/Sofa/Cabinet/Couch/Dresser/Table -Heavy Bed Replacement Legs

Wlrrcwdttc #ad - Compared with other brands of bed legs, can effectively anti-slip, the smaller the pressure. This means that the weight-bearing capacity of our bed legs will be stronger than that of other brands. According to the theory of physics, the larger the force area, reduce noise and protect the floor.

And the bottom also uses high-quality rubber pads, our bed leg base is thicker and has a larger force area. The unadjusted original height is 7. 08 inches 18cm, the longest can be adjusted to 12. 2 inches 31cm -- please check the size information before you buy to make sure the size is exactly what you need --.

International products have separate terms, age ratings, and language of product, are sold from abroad and may differ from local products, including fit, labeling or instructions. Adjustable bed support legs the height of this bed legs can be adjusted with the swivel base to select the right height to suit uneven floors. Upgrade feet base the base of our bed legs is upgraded and improved.
BrandWlrrcwdttc #ad
ManufacturerWlrrcwdttc #ad
Length3.8 cm (1.5 Inches)
Part NumberWlr009



EETU 10cm/4inch Wooden Furniture Legs, Wood Cabinets Replacement Furniture feet with Mounting Plates and Screws for Armchair Table Couch Bed, Solid Wood Sofa Legs Set of 4

EETU #ad - Wide application - the end table legs are universal for different kinds of furniture, cabinet, sofa, armchair, night stand, couch, drawer and etc. The complete set of products after correct installation can bear 800lbs, and it have been carefully selected, with exquisite craftsmanship and beautiful appearance.

Also suitable for your DIY furniture project. Protect and prevent noise- we have installed gaskets at the bottom of our furniture feet to protect the ground and prevent noise, so you can save the trouble of choosing and installing protective gaskets and leg mounting plates. Retrofit your furniture fast and convenient. We have installed gaskets at the bottom of our furniture feet to protect the ground and prevent noise, so you can save the trouble of choosing and installing protective gaskets and leg mounting plates.

Superior quality - our wood legs for furniture are made of rubber wood materials, which are strong and stable. Easy to install - the furniture legs are attached with 5/16'' hanger bolts and provided with mounting plates for installation. Protect and prevent noise- we have installed gaskets at the bottom of our furniture feet to protect the ground and prevent noise, so you can save the trouble of choosing and installing protective gaskets and leg mounting plates.
BrandEETU #ad
ManufacturerEETU #ad
Part NumberWL10



Cabinet Replacement Parts., Table, for Bed Frame, BEDEXUT 2 Pack Adjustable Height Center Support Leg 13-16", with Heavy Duty Furniture Feet and Non-Welded Bracket Suitable for Bed, Sofa, Wood Slat

BEDEXUT #ad - Long-term protection: every bed needs to be guarded, and our bed support feet are here to do just that. This not only reduces noise but also protects your floor from scratches. Versatile design: when the bed frame has holes, if not, the bracket is designed with four screw holes around it and equipped with four screws, just use the bed frame and auxiliary plate to clamp the bed frame and tighten the screws, you can choose double holes or center holes to align with the bracket and tighten the screws, so you don't need to worry about the thickness of the object is too thick to work.

This saves you the expensive cost of repairing and replacing your mattress in the long run. Stronger load: our under bed support legs are perfectly made of extra heavy duty foot and heavy duty weight bearing rubber base to ensure the stability and durability of the bed frame. They evenly distribute the weight of your mattress, platform bed frame, wooden slats, mattress foundation, preventing it from sagging and maintaining the service life of your bed frame, and spring box. Height adjustable:measure the height of the bed frame or center wood slats to the ground to choose the right adjustable range of bed frame center support legs, simply turn the height increase screws for height adjustment, lock each height increase screw and top with the included fastening nut rotating upwards to ensure a secure connection.

Widely used in bed frames, sofa furniture pods, bed center slats, patas para cama and other places where you want support. Casting top bracket: the top of the adjustable bed support leg is designed with thick casting one-piece T-shape to avoid the risk of weakness and breakage caused by welding when subjected to heavy pressure, allowing you to sleep with more peace of mind.
BrandBEDEXUT #ad
ManufacturerBedexut #ad
Part Number2xSupport 2+2
Model2xSupport 2+2

10. Riobby


33cm Black 1 Pack, Riobby Bed Support Legs Adjustable Legs, Metal Furniture Foot Retractable Heavy Duty Bed Center Frame Slat Support Leg for Cabinet Sofa Bed Frame Replacement Parts 18cm

Riobby #ad - High quality material: made of high-quality cast iron, good durability, it has a sturdy structure, strong support, and dual advantages of aesthetics and practicality. You can adjust the height you like and get used to, making your sleep more comfortable and reducing waist discomfort and physical fatigue.

Convenient and practical: adopting an adjustable design, the height can be adjusted by gently twisting; Innovative design, convenient and practical; The base adopts an upgraded high-quality focal pad circular base, protecting the floor, suitable for various usage scenarios, reducing noise, making it safer and more comfortable to use. Multi functional bed frame support legs: in addition to ordinary bed frame support functions, cabinets, furniture, such as bedside cabinets, etc.

Desks, they can also be used in other places, storage racks, adding more aesthetic and practical functions to your bedroom and home. Adjustable height: easily solve the problem of uneven mattresses or mismatched bed heights. Tough and durable: made of tough steel with anti-corrosion treatment on the surface, it has a long service life and stable support weight, ensuring that your bed is sturdy and durable.
BrandRiobby #ad
ManufacturerRiobby #ad
Part Number68585